Shipping LiFePO4 Batteries Overseas in 2026 UN 38.3 Documents State of Charge and Buyer Checks

Table of Contents

Large battery modules protected in export cra

“LiFePO4 battery” tells the booking desk less than many buyers expect. The chemistry is useful, and this note on lithium-ion and LiFePO4 batteries covers the basic distinction. Shipping staff still need the physical arrangement: battery alone, battery beside its equipment, or battery already fitted inside.

Put that answer on the order before timber, foam and straps are prepared. It points to the UN number and the air packing instruction, which in turn shape the documents and booking.

Three packing arrangements that buyers should not mix up

Sent without equipment, the lithium-ion battery is UN 3480. An air booking then starts with PI 965.

When the battery and the equipment it powers share an outer package, the wording becomes UN 3481, packed with equipment. Air shipments then start from PI 966.

Install it in the equipment and it is still UN 3481, but now it is contained in equipment. “Packed with” and “contained in” sound almost identical across a sales desk. A booking desk reads them as two different arrangements.

Put the intended arrangement on the order. A later request to separate an assembled system into battery modules and other parts changes the picture, so the dangerous-goods specialist needs to see it again. The earlier booking may no longer suit the cargo.

Get the UN 38.3 test summary before the cargo is ready

Top-down buyer document review with shipment

The test summary often becomes “urgent” only after a forwarder asks for it. That late request leaves little time to resolve different model names before the packing date.

Under the IATA lithium battery guidance document, manufacturers and later distributors generally make the UN 38.3 test summary available for the covered cells, batteries and equipment. “Available” does not mean a sheet of paper must be tucked into every box. A website, QR code or URL can do the job.

For a buyer, availability is only half the check. The file also needs to match the battery on the order. Read the manufacturer name, battery description and model reference together. Sales names do not always match laboratory or production names. Where they differ, get a short written explanation that ties one to the other; “same battery” in a chat message leaves too much room for doubt.

Request the file or a working link. A simple “yes, UN 38.3” is not the document.

Keep the SDS in its proper place

An SDS and a UN 38.3 test summary answer different questions.

IATA is direct on this point: an SDS is not a transport document. It may still be useful to a customer or forwarder, but it is a separate file with a separate purpose. Calling it the test summary does not make it one.

A tidy purchase folder helps here. Keep the product specification, test summary, packing description and shipment papers as separate files. When somebody asks about a model or package, the buyer can find the relevant document without searching through several PDFs called “battery certificate.”

The 30% SOC limit is tied to the air-shipping arrangement

For lithium-ion batteries sent by themselves under PI 965, IATA requires a state of charge no higher than 30% of rated capacity. Going above that level needs the approvals described for the State of Origin and the State of the Operator. These batteries also do not normally go on passenger aircraft without approval.

The 2026 change is quite specific. From 1 January, PI 966 Section I lithium-ion cells and batteries go to air transport at no more than 30% SOC. In Section II, batteries above 2.7 Wh fall under the same ceiling.

Do not trim away the “PI 966” part when passing the instruction to the factory. The rule quoted here concerns batteries packed with equipment. A contained-in-equipment booking needs its own check rather than a copied note saying “UN 3481, 30%.”

Nor is it a general sea-freight rule. A sea booking has to be reviewed under the current IMDG Code, the countries involved and the carrier’s own conditions.

Agree how SOC will be checked

A storage battery may leave production at a higher SOC than the air booking allows. Bringing it down is a job, sometimes a slow one. The factory also has to show which packed unit or batch the reading belongs to.

Put the method into the pre-shipment discussion. Who takes the reading? At what stage? Does the record cover each module, the complete battery or a production batch? If the battery is charged for a final test afterward, is another reading needed before packing?

Waiting until collection day only adds pressure. Once the route and packing instruction are settled, agree the limit, the measuring method and the record format.

Give the forwarder the real route

“Ship to Germany” or “ship to Australia” is not a route.

One order might go by truck to a port, change vessels on the way and finish inland with another carrier. An air shipment can change operator too. That is where state and carrier variations start to matter.

For an air quote, send the proposed packing arrangement, UN number, watt-hour information, quantity, package plan and route. Let the appointed dangerous-goods professional confirm the packing instruction, section, marks, labels, declaration and aircraft restriction.

Handle a sea quote separately. Avoid copying the air instructions into the sea file simply because the product has not changed.

What the buyer should request

Cargo, route and carrier decide the final file set. Even so, the first request to the supplier can stay short:

  • product specification that identifies the battery;
  • accessible UN 38.3 test summary matched to that battery;
  • packing description: alone, packed with equipment, or contained in equipment;
  • quantity and watt-hour information for the booking;
  • SOC record when the confirmed air instruction calls for it;
  • shipment papers requested by the appointed dangerous-goods professional or operator.

If an SDS is kept in the folder, give it an unmistakable filename. The reviewer should not have to open three vaguely named “battery certificates” to find the UN 38.3 test summary.

Send the request while production is moving, not after the collection date is booked. A model mismatch or revised pack is easier to fix while the goods are still on the factory schedule.

Make responsibility visible in the order

Work is often divided three ways. The supplier prepares the battery and packing, the buyer appoints a forwarder, and a third company may prepare the dangerous-goods declaration. The unassigned job is easily missed because each party assumes it sits in another scope.

The order should name the person supplying the test summary and the party approving the packing plan. It should also deal with a late change of transport mode, including the cost of repacking. Document approval belongs before collection.

With large energy storage equipment, assembled shipment versus separate modules is an early decision. Supplier, buyer and logistics specialist all need a say. The same planning point appears in these BESS container checks for transport and site commissioning. A cheaper freight line on its own is not enough reason to change the arrangement.

The intended battery system and export arrangement can be discussed with WonVolt. For the shipment itself, the appointed dangerous-goods professional and carrier have to confirm classification, packing and paperwork against the real cargo.

Conclusion

Most preventable delays have ordinary causes. The packing arrangement was never written down. The test summary arrived too late to match the model. An SOC instruction came from a different shipment.

Name the arrangement first. Check that the UN 38.3 test summary belongs with the supplied battery. On an air order, keep the 30% SOC instruction attached to the right packing instruction and section. The route and the appointed specialist can then settle what remains.

FAQ

When is a LiFePO4 battery UN 3480, and when is it UN 3481?

On its own, it is UN 3480. Beside the equipment it powers, or installed inside that equipment, it is UN 3481. After that comes the check for the correct packing instruction and section.

Does a paper UN 38.3 test summary have to travel with every shipment?

Not under the general IATA guidance cited here. The summary must be made available, and a website, QR code or URL can be used. Country and operator requirements may add other requests.

Does every LiFePO4 shipment have a 30% SOC limit?

No. The rules discussed here cover particular air arrangements: PI 965 for batteries shipped alone and, from 2026, the stated parts of PI 966 for batteries packed with equipment. Other arrangements and sea transport need their own review.

GROW YOUR BUSINESS WITH WONVOLT ENERGY STORAGE SOLUTIONS.

Let’s get more stable power and lower cost with clean energy.